Why does my Viking range keep clicking after the burner lights?

The usual causes are moisture or food residue around the burner, a worn igniter switch, or a failing spark module. If letting the burner dry out doesn't stop the clicking, we can test the parts and replace the one that has failed.

Do you repair Wolf dual-fuel ranges?

Yes. We work on both the gas cooktop and the electric oven, including burners, igniters, heating elements, temperature sensors, and controls.

My Thermador burner won't hold a low simmer. Can that be fixed?

Usually, yes. Common causes are clogged burner ports, a misaligned cap, or an ignition or valve problem. We clean, test, and adjust the burner, and replace parts only when needed.

Are you authorized by Viking or the other brands?

No. We are an independent repair company and are not affiliated with or endorsed by Viking, Sub-Zero, Wolf, or Thermador. We specialize in repairing their appliances.

Which Beverly Hills areas do you cover?

We serve homes in ZIP codes 90211 and 90212, as well as nearby West Hollywood, Los Angeles, Culver City, Santa Monica, and Burbank.

Can you fix my oven if it heats unevenly?

Yes. Uneven baking can come from a failing element or igniter, a faulty temperature sensor, a convection fan problem, or a worn door seal. We test each one to find the cause.

Range Repair in Beverly Hills, CA

The short answer

Viking Appliance Services repairs Viking, Wolf, and Thermador ranges in Beverly Hills homes, including burners that won't light, constant clicking, oven temperature problems, and control faults. A technician diagnoses the range in your kitchen and explains the fix before starting.

When a pro-style range stops lighting, clicks without end, or bakes unevenly, the whole kitchen slows down. Viking Appliance Services repairs gas, electric, and dual-fuel ranges in Beverly Hills homes across ZIP codes 90211 and 90212. We lead with Viking ranges and also work on Wolf and Thermador cooking equipment, plus the Sub-Zero refrigeration that often shares the same kitchen. We are an independent repair company and are not affiliated with any of these brands. We send a technician to your home, find the actual cause, and explain the repair before any work begins.

Range problems we fix in Beverly Hills homes

Most range calls come down to a short list of problems. A professional range has more parts than a basic one, including multiple burner sizes, a heavier oven, convection fans, and on dual-fuel models, a gas cooktop paired with an electric oven. That gives more places for a fault to start. We diagnose by symptom first, so you aren't paying to replace parts that are working fine.

Burners that won't ignite, or that light slowly with a puff
Igniters that keep clicking after the flame is lit
Weak, yellow, or uneven flames, or a simmer setting that goes out
Oven that won't heat, heats slowly, or runs hot or cold
Convection fan that is noisy or not spinning
Self-clean cycles that won't start or won't unlock
Control knobs, displays, or boards that don't respond
Oven doors that don't seal or close properly

Working on Viking, Wolf, and Thermador ranges

Each brand builds its ranges a little differently, and those differences show up in the repair. On Viking gas ranges, constant clicking often traces back to moisture around a burner, a worn switch, or a failing spark module. A gas oven that won't light is commonly caused by a weak oven igniter that no longer draws enough current to open the gas valve.

Wolf dual-fuel ranges pair sealed gas burners with an electric oven, so an oven problem may involve heating elements, sensors, or the control board rather than gas parts. Thermador ranges use star-shaped burners and a very low simmer function. When a low flame drops out, the cause is often burner alignment, a dirty port, or an ignition fault.

We check the specific model in front of us rather than guessing from the brand name. If your kitchen also has a Sub-Zero refrigerator that isn't holding temperature, we can look at it during the same visit.

What a range repair visit looks like

We schedule a time window that works for you, and a technician arrives with tools and common parts for premium ranges. The technician will ask what you have noticed, such as when the problem started, which burners or modes are affected, and whether you hear clicking or smell gas. Then they test the range directly by checking ignition, flame quality, oven temperature, and the electrical parts involved.

Before making a repair, we explain what failed, what needs to be replaced, and why. Some fixes can be done on the spot. If a model-specific part has to be ordered, we tell you up front and schedule a return visit to finish the job.

Tell us what your appliance is doing.

Call (712) 333-1469 Request Service

Quick checks and safety before you call

A few simple checks can save time. Make sure the range is plugged in and the breaker hasn't tripped, since gas ranges still need power for ignition. Remove the burner caps and confirm they are dry and seated flat, because a spill or a misaligned cap is a common cause of clicking and weak flames. Check that the oven isn't set to a delay or lockout mode.

If you smell gas, don't try to light the range. Turn off the burners, avoid using switches, open windows if it's safe to do so, leave the home, and contact your gas utility. Call us once the utility has confirmed the area is safe.

Serving Beverly Hills and nearby areas

Beverly Hills is about 11 miles southeast of our base in Reseda, and we schedule regular service visits throughout the city. We also repair ranges in nearby West Hollywood, Los Angeles, Culver City, Santa Monica, and Burbank, along with other parts of Los Angeles County.