Do you repair Thermador and Viking dishwashers?

Yes. We repair Viking and Thermador dishwashers, including built-in and panel-ready models. In the same homes, we also service Sub-Zero refrigeration and Wolf cooking appliances.

Are you affiliated with any appliance manufacturer?

No. Viking Appliance Services is an independent repair company. We aren't affiliated with or endorsed by Viking, Sub-Zero, Wolf, Thermador, or any other brand.

Why is there standing water in my dishwasher?

The most common causes are a clogged filter, a blocked drain hose or air gap, a disposal knockout plug that was never removed, or a failed drain pump. Try cleaning the filter first. If water still won't drain, a technician can test the pump and drain path.

What should I do if my dishwasher is leaking?

Stop using it, turn off the water supply valve, usually under the sink, and switch off power at the breaker or outlet. Then wipe up the water. Leaks usually come from door gaskets, tub seals, or hose connections, and these are typically repairable.

Is it worth repairing an older premium dishwasher?

Often it is, especially when the problem is a pump, valve, gasket, or sensor. It depends on the unit's overall condition and whether parts are still available. We'll give you an honest assessment after diagnosing it.

Do you serve areas near Beverly Hills?

Yes. In addition to Beverly Hills, we serve West Hollywood, Los Angeles, Culver City, Santa Monica, and Burbank.

Dishwasher Repair in Beverly Hills, CA

The short answer

Viking Appliance Services repairs Viking and Thermador dishwashers in Beverly Hills homes. We fix draining, leaking, cleaning, drying and error-code problems on site. We take extra care with built-in, panel-ready units. We're an independent company that also services Sub-Zero and Wolf appliances.

A dishwasher that won't drain, leaves a gritty film on glasses, or stops mid-cycle with a flashing light can throw off a whole kitchen. Viking Appliance Services repairs dishwashers in Beverly Hills homes, with a focus on premium built-in models. We work on Viking and Thermador dishwashers, and we often service the Sub-Zero refrigeration and Wolf cooking equipment in the same kitchens. We're an independent repair company, not affiliated with any manufacturer, and we come to you from our base in Reseda, about 11 miles northwest of Beverly Hills.

Dishwasher problems we fix in Beverly Hills homes

Most dishwasher trouble shows up as one of a handful of symptoms. The cause behind each one can vary, so we test the actual parts before replacing anything. Here is what we see most often and what usually causes it:

Standing water after a cycle: a clogged filter, a kinked or blocked drain hose, a failed drain pump, or a stuck check valve
Dishes still dirty or gritty: clogged spray arm jets, a worn wash pump, low water fill, or a faulty inlet valve
Dishes coming out wet: a failed heating element or drying fan, an empty or broken rinse aid dispenser, or a vent problem
Water on the floor or under the door: a worn door gasket, a failed tub seal, loose hose connections, or overfilling
Won't start or stops partway through: a door latch or switch, a sensor, a control board, or a tripped leak-protection float
Error codes, flashing lights, or a dead control panel
Grinding, humming, or rattling: debris in the pump or worn motor bearings

Dishwasher Repair in a luxury home kitchen

Careful work on built-in and panel-ready dishwashers

Many Beverly Hills kitchens have dishwashers fitted with custom cabinet panels so they blend into the surrounding millwork. That look depends on precise mounting. When a repair means pulling the unit out, we protect the panel, the adjacent cabinets, and the flooring. Then we reinstall the dishwasher level, secured, and aligned with the doors around it.

Premium dishwashers are designed to run quietly. A new noise or a small drip under the toe kick is often the first sign that something is wrong. Calling early, before a slow leak reaches the subfloor or cabinet base, usually keeps the repair simpler.

What to expect during a repair visit

We start by recording the model and serial number and asking what you've noticed: when the problem started, any error codes, and whether it happens every cycle. Then we test the components involved rather than guessing.

Before any work begins, we explain what we found and what we recommend. Common parts can often be replaced on the first visit. Some parts for premium models have to be ordered, and when that happens we tell you and schedule a return visit. If a repair doesn't make sense for an older unit, we'll say so plainly so you can decide whether to repair or replace.

Tell us what your appliance is doing.

Call (712) 333-1469 Request Service

Quick checks before you call

A few problems have simple causes you can check yourself. These are safe to try and can save you a visit:

Clean the filter at the bottom of the tub. A clogged filter is a common cause of poor cleaning and slow draining.
Run the kitchen faucet until it runs hot before starting a cycle, so the dishwasher fills with warm water.
If a garbage disposal was just installed, make sure its drain knockout plug was removed.
Clear the countertop air gap, if you have one, when water backs up during draining.
Make sure tall items aren't blocking the spray arms, and check that the rinse aid dispenser isn't empty.
If water is on the floor, turn off the dishwasher's water supply and switch off its power before anything else.

Serving Beverly Hills and nearby communities

We schedule dishwasher repair appointments throughout Beverly Hills, including homes in the 90211 and 90212 ZIP codes. Our technicians travel from Reseda in Los Angeles County. We also serve West Hollywood, Los Angeles, Culver City, Santa Monica, and Burbank.

Beyond dishwashers, we repair other premium appliances in the same kitchen, including Viking ranges, Sub-Zero refrigerators and freezers, Wolf ovens and cooktops, and Thermador appliances. If more than one appliance needs attention, mention it when you book so we can plan the visit.