Why does my Viking range keep clicking after the burner lights?

Common causes are moisture around the igniter after cleaning or a spill, a burner cap that isn't seated correctly, a stuck spark switch or a failing spark module. If drying the area and reseating the caps doesn't stop it, the switch or module likely needs testing.

Do you repair Wolf dual-fuel ranges?

Yes. We work on both the gas cooktop and the electric oven sections of Wolf dual-fuel ranges, including ignition, heating elements, sensors and controls.

Can you fix a Thermador range that won't hold a low simmer?

Yes. Simmer problems usually come from the burner valve, burner parts or the ignition system. We check each one to find which is causing the flame to drift or go out.

My oven takes forever to preheat. Is that worth repairing?

Often it is. Slow preheating on a gas oven is frequently caused by a weak bake igniter, and on electric ovens by a failing element or sensor. These are usually repairable without replacing the range.

Are you affiliated with Viking, Sub-Zero, Wolf or Thermador?

No. Viking Appliance Services is an independent repair company. We are not affiliated with or endorsed by any appliance manufacturer.

Which areas near Culver City do you serve?

Besides Culver City, we serve Los Angeles, Beverly Hills, Santa Monica, West Hollywood and Burbank.

Range Repair in Culver City, CA

The short answer

Viking Appliance Services repairs Viking, Wolf and Thermador ranges in Culver City homes, including clicking igniters, burners that won't light, uneven flames, ovens that won't heat and control faults. We test the burner, oven and control systems on site to find the cause, then explain the fix before any work begins.

A professional-style range is usually the busiest appliance in a Culver City kitchen, so a burner that won't light or an oven that runs cold is a real problem. Viking Appliance Services repairs high-end gas, dual-fuel and electric ranges in homes across ZIP codes 90230 and 90232. We work mainly on Viking ranges, and we also service Wolf and Thermador models. Many of the kitchens we visit pair one of these ranges with Sub-Zero refrigeration, and we can look at both on the same visit. We are an independent repair company, not affiliated with any of these brands. We come from our base in Reseda, about 16 miles away, and we focus on finding the actual cause of the problem.

Range Problems We See Most Often

Most range calls start with one clear symptom, but the cause can sit in a few different places. Continuous clicking after a burner lights can point to moisture around the igniter, a burner cap that isn't seated, a worn spark switch or a failing spark module. A burner that lights slowly or burns yellow often has a clogged port or a misaligned cap. An oven that takes too long to preheat or never reaches temperature may have a weak bake igniter, a failing temperature sensor or a control problem.

These are the issues we diagnose and repair most often on professional-style ranges:

Igniters that click nonstop, spark weakly or don't spark at all
Surface burners that won't light, go out, or burn with a low or uneven flame
Simmer settings that won't hold a steady low flame
Gas or electric ovens that won't heat, overheat or bake unevenly
Convection fans that are noisy or don't turn
Broilers, griddles and charbroilers that don't heat properly
Oven doors that won't close fully, hinge problems and worn gaskets
Unresponsive knobs, displays and control boards on dual-fuel models

How We Handle Each Brand

Viking ranges are the core of our work. On older and newer Viking gas ranges, we often trace clicking and ignition problems to spark switches, wiring near the burners or moisture after a spill. On Viking ovens, we check igniters, sensors and door seals to sort out slow preheating and uneven baking.

Wolf ranges, especially dual-fuel models, combine gas burners with an electric oven. That means a fault can be mechanical, electrical or in the controls. We test each system separately so the repair addresses the real cause instead of swapping parts until something works.

Thermador ranges have their own burner designs and low-simmer features. When a simmer flame drifts or a burner won't hold a setting, we check the valve, the burner parts and the ignition system before recommending a part.

What to Expect During a Repair Visit

When you contact us, tell us the brand, the model if you can find it, and what the range is doing. The model and serial number are usually on a tag near the oven door frame, under the control panel or behind a drip tray. That information helps us bring the right parts.

At your home, we check how the range behaves, inspect the burners, igniters, oven components and controls, and explain what we found in plain terms. If a part needs to be ordered, we tell you what it is and why before any work begins. We also leave the work area clean, which matters when the range is the centerpiece of an open kitchen.

Tell us what your appliance is doing.

Call (712) 333-1469 Request Service

Simple Checks Before You Call

A few problems have quick fixes. If a burner keeps clicking after cleaning, let the area dry completely and make sure each cap and grate sits flat. If nothing lights, confirm the range is plugged in and the breaker hasn't tripped, since gas ranges still need power for the spark. If you smell gas, don't try to find the leak yourself. Turn off the range, leave the house and call your gas utility or emergency services first.

If the problem continues after these checks, schedule a diagnosis rather than taking panels apart. Professional ranges have tight tolerances around gas valves and wiring.

Serving Culver City and Nearby Areas

We serve homes throughout Culver City in Los Angeles County, including the 90230 and 90232 ZIP codes. We also repair Viking, Wolf and Thermador ranges, along with Sub-Zero refrigeration, in nearby Los Angeles, Beverly Hills, Santa Monica, West Hollywood and Burbank. If you're not sure we cover your street, ask when you reach out.